Ten64 firmware release Branch v0.8-rtm built on 2021-04-26. Commit log: fe261a9b flash.sh: fix device tree typo You can view the CI pipeline that built these artifacts at: https://gitlab.com/traversetech/ls1088firmware/firmware-builder/-/pipelines/292153827 You can view the repository at: https://gitlab.com/traversetech/ls1088firmware/firmware-builder Usage ---------------------------------- The best way to reflash your Ten64 unit is to write the "rescue-sdcard.img.bz2" (after decompressing) to a microSD card and to start your Ten64 in SD-boot mode. SD-boot mode can be activated by moving DIP Switch position 1 (nearest LEDs D2/D13) to the OFF position, see the quickstart page for a reference: https://ten64doc.traverse.com.au/quickstart/#dip-switch-and-board-led The U-Boot menu will present a "Reflash Board" menu option. See https://ten64doc.traverse.com.au/software/reflash/ for more details. Once the reflash is done you can move the DIP switch back to the normal 'ON' position. You can also reflash individual files using U-Boot or the recovery firmware, see the above page for details.