Ten64 firmware release

Branch v0.8-rtm built on 2021-04-26.
Commit log:
fe261a9b flash.sh: fix device tree typo


You can view the CI pipeline that built these artifacts at:
https://gitlab.com/traversetech/ls1088firmware/firmware-builder/-/pipelines/292153827
You can view the repository at:
https://gitlab.com/traversetech/ls1088firmware/firmware-builder

Usage
----------------------------------
The best way to reflash your Ten64 unit is to
write the "rescue-sdcard.img.bz2" (after decompressing)
to a microSD card and to start your Ten64 in SD-boot mode.

SD-boot mode can be activated by moving DIP Switch position 1
(nearest LEDs D2/D13) to the OFF position, see the quickstart
page for a reference:
https://ten64doc.traverse.com.au/quickstart/#dip-switch-and-board-led

The U-Boot menu will present a "Reflash Board" menu option.
See https://ten64doc.traverse.com.au/software/reflash/ for
more details.

Once the reflash is done you can move the DIP switch back to the
normal 'ON' position.

You can also reflash individual files using U-Boot or
the recovery firmware, see the above page for details.
